|
| |
Mission Statement
To provide our customers with any type of industrial steels such steel round bar, RCS, Squares,
Flats, TMT Bars, etc as per their needs and to take out all their
stresses of procurement and
related services
Company Profile
Ambhe Ferro Metal Processors Private Limited is
a professionally managed company engaged in the manufacture of rolled products for
more than two decades. We
have built over the decades a solid reputation for excellent quality and
customer service. We are manufacturing superior quality steel round bars,
RCS (Round Cornered Squares), Squares (Sharp Cornered), and Special Profiles of
MS, Carbon, Alloy, Stainless Steel and other Special Grades.
The following is our
product range
1)
Mild
steel round bars, Stainless steel round bars, Alloy Steel Round Sizes
Sizes: 18mm, 20mm, 22mm, 23.5mm, 25mm, 26mm, 27mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm, 45mm,
48mm, 50mm, 53mm, 56mm, 60mm, 63mm, 65mm, 71mm, 75mm, 80mm
2)
RCS (Round Cornered Squares)
55mm,
63mm, 75mm
3)
Mild & Alloy Steel Squares
25mm, 27mm, 32mm, 34mm, 40mm, 42mm, 50mm, 53mm
4)
TMT Bars
20mm, 25mm, 32mm Fe415, Fe460, Fe500, Fe550
5)
Flats
Any size
from 50mm x 8mm to 150mm x 25mm in Mild or Alloy Steel
Standard
Sizes
50mm x 8, 10, 12, 16, 20, 25 mm
63mm x 8, 10, 12, 16, 20, 25 mm
75mm x
8, 10, 12, 16, 20, 25 mm
100mm x 8, 10, 12, 16, 20, 25 mm
125mmx 8mm, 10mm, 12mm, 16mm, 20mm, 25mm
150mmx 8mm, 10mm, 12mm, 16mm, 20mm, 25mm
grades such as Mild Steel, A105, 41Cr4, En8d, 35C8, En9, 16MnCr5,
20MnCr5, 4140, 8620, etc from which we can roll any size depending on your
requirement.
We believe in providing solutions rather than just steel bars.
eg. We can provide
the above products in your required length or multiple thereof.
See
our Products and Services section for more details.
Since we have an
independent rolling mill we can source our raw material from any source as per
your application like critical, non-critical, VD route material etc. We are an
ISO9001: 2000 certified company. Our company is also BIS approved and we have
IS 2062 certification. Our factory is strategically located in MIDC Murbad near
Kalyan and can cater easily to the markets of Mumbai, Pune, Aurangabad,
Ahmednagar, Nasik, Gujarat, Aurangabad, Kolhapur, etc.
We can supply you
best quality material at most competitive rates. We have good quality assurance
system with full traceability
We have
also been doing Conversion for Mukand Ltd and MUSCO (Mahindra Ugine Steel Company Limited).
Our clients appreciate our prompt
service and quality of our products and our commitment to long term
relationships.
Please
contact Mr. Suryakant Mandavia (Mobile: 9820063281) or Mr. Ashish Gupta at
9869618593 to get our most competitive rates or any
clarifications you may require. You can also email us at
sales@ambhe.com .
We can
supply you best quality material at most competitive rates. We have good quality
assurance system with full traceability
We would
like to work with you improve your purchasing experience of steel and develop a
long term relationship.
.
|
